Page tree
Skip to end of metadata
Go to start of metadata

Epilog Laser Fusion - laser cutter for 2D/3D design and fabrication

Model: Epilog Fusion M2 40 Laser

With an oversized table of 40" x 28" (1016 x 711 mm), the Fusion M2 40 features Epilog's largest work area.

This machine was designed to engrave the same high-quality image at any point on the table by utilizing Epilog's top-of-the-line motion control system and industry-leading optics system.

 

Vendor website: https://www.epiloglaser.com/

Technical Specifications

 Epilog Fusion M2 40 
Engraving Area40" x 28"
(1016 x 711 mm)
Maximum Material Thickness13.25" (336 mm)
Laser WattageCO2:  75 watts
Laser SourceState-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable.
Intelligent Memory CapacityMultiple file storage up to 128 MB.
Air AssistAttach an air compressor to our included Air Assist to remove heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface.
Laser DashboardThe Laser Dashboard™ controls your Epilog Laser's settings from a wide range of software packages - from design programs to spreadsheet applications to CAD drawing packages.
Red Dot PointerSince the laser beam is invisible, the Red Dot Pointer on the Fusion Laser allows you to have a visual reference for locating where the laser will fire.
Relocatable HomeWhen engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with the convenient Movable Home Position feature on the Fusion Series Lasers.
Operating ModesOptimized raster, vector or combined modes.
Motion Control SystemHigh-speed Brushless DC Servo Motors.
X-Axis BearingsGround and polished stainless steel Long-Lasting Bearing System.
BeltsKevlar (x-axis) and Steel Cord (y-axis) belts.
ResolutionUser controlled from 75 to 1200 dpi.
Speed and Power ControlComputer or manually control speed and power in 1% increments to 100%. Vector color mapping links speed, power and focus to any RGB color.
Print Interface10 Base-T Ethernet or USB Connection. Compatible with Windows® XP/Vista/7/8/10.
Size (W x D x H)60.5" x 41.25" x 42.25"
(1537 x 1048 x 1073 mm)
43" (1092 mm) deep with exhaust plenum.
Weight643 lbs (292 kg)
Electrical RequirementsAuto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase, 15 amp AC.
Maximum Table WeightFusion 32/40: 200 lbs (90 kg) for static and 100 lbs (46 kg) for lifting.
Ventilation System650 CFM (1104 m3/hr) external exhaust to the outside or internal filtration system is required. There are two output ports, 4" (102 mm) in diameter.

 

See guidelines on Laser cutting.

See safety rules of using the laser cutter and other equipment.

See Materials allowed and not allowed with the laser cutter.

  • No labels